ISO 4545-1:2023 PDF
Original price was: $155.00.$120.90Current price is: $120.90.
Metallic materials — Knoop hardness test — Part 1: Test method
This document specifies the Knoop hardness test method for metallic materials for test forces from 0,009?807?N to 19,613?N.
This document specifies Knoop hardness tests for length of the long diagonal =0,020?mm. Using this method to determine the Knoop hardness from smaller indentations is outside the scope of this document as results would suffer from large uncertainties due to the limitations of optical measurement and imperfections in tip geometry.
The Knoop hardness test specified in this document is also applicable for metallic and other inorganic coatings including electrodeposited coatings, autocatalytic coatings, sprayed coatings and anodic coatings on aluminium. This document is applicable to measurements normal to the coated surface and to measurements on cross-sections, provided that the characteristics of the coating (smoothness, thickness, etc.) permit accurate readings of the diagonal of the indentation. This document is not applicable for coatings with thickness less than 0,007?mm when testing normal to the coating surface. This document is not applicable for coatings with thickness less than 0,020?mm when testing a cross-section of the coating. ISO?14577-1 can be used for the determination of hardness from smaller indentations.
A periodic verification method is specified for routine checking of the testing machine in service by the user.
| Edition | 2023 |
|---|---|
| Standard Part No | 1 |
| Published Date | 2023 |
| Published By | International Standardization Organisation |
| Page Count | 28 |
